Write a Review

The Syntax Mips® combines a touch of European flair with slightly deeper coverage and high-performance features — all tucked into a very slim design. The Syntax Mips® combines a touch of European flair with slightly deeper coverage and high-performance features — all tucked into a very slim design. The fit is luxurious and secure, thanks to our highly adjustable Roc Loc™ 5 Air Mips system that allows you to customize fit and feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact. The outer shell is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold construction process to enhance durability and ventilation without excess bulk. FEATURES - HARDSHELL WITH IN-MOLD HARDBODY™ LOWER WRAP — The two-piece shell combines a tough outer hard shell with a polycarbonate lower shell permanently fused to the liner for durability without excess weight. - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips-equipped helmets is to reduce rotational forces. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. - ROC LOC 5 AIR MIPS FIT SYSTEM — This revolutionary fit system adds a new dimension to helmet performance by enhancing cooling, as well as fit comfort and stability. Using a patented design that suspends the helmet just slightly off the top of the skull, Roc Loc 5 Air Mips allows cool airflow to pass directly over your head, further enhancing the performance of vents and internal channeling that exhaust heat out of the helmet. Fit and feel adjustments mimic the Roc Loc 5 Mips, allowing you to easily custom tune fit tension and fore-aft tilt of the helmet in seconds using a single hand. - WIND TUNNEL VENTILATION — Giro helmets are developed utilizing our proprietary Wind Tunnel™ ventilation system. This elaborate design combines active vents in the helmet's shell with exhaust channels inside the helmet that thrust fresh, cool air over and around the rider's head while forcing heat and stale air out. It's the most effective cooling system available, and a difference you can feel every time you ride. - IONIC+® PADDING — Pure Silver is the secret ingredient that gives IONIC+® the power to provide natural, permanent odor protection to keep your helmet feeling fresh. HIGHLIGHTS - Ionic+™ anti-microbial padding - Featherweight webbing with Slimline™ Buckle Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older E.U.: CE EN1078

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with SSR and Select wheels - Includes 11mm Allen key adapter for installation

These original replacements will get your wheels working like new. - Alloy thru-axle that can be used with a 6mm hex wrench or with a lever - Keep it light by removing the lever and instead use a 6mm hex wrench - Keep it convenient by keeping the lever inside the axle - Lever is held securely by internal O-ring - Lever sold separately

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction

- Gray tread, sidewalls with raised center and lateral knobs - 26 x 1 3/8 (ISO 590)

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

Made with recycled materials, this grip features a contoured shape and dual-density construction for ultimate support on any trail. Lock-on comfort Take the long way with the XR Endurance Comp Recycled Grip made using recycled plastics at the grip core. Contoured shaping provides comfort and support, while an opposing tread pattern ensures your palms are padded and your fingers stay in place. This Dual-Density grip features a lightweight lock-on design that securely attaches to any bar. Using recycled materials in this product helps provide second life to unwanted end of life plastics. Product details - Grip core is made from recycled plastic - Contoured design comfortably supports palm to decrease fatigue - Opposing tread pattern absorbs shock in palms and increases grip at fingertips - Dual-density compound provides secure grip, control, and comfort - Continuous tread pattern optimizes grip for moisture management and shock absorption - Lock-on clamp securely holds grip core to bar, eliminating slipping Features: The net effect Fishing nets make up an estimated 10% of all plastic in the ocean. What's even worse is that they're 4 times more harmful to the ocean environment than all other forms of plastic pollution. A global issue Each year 18 billion pounds of plastic enters the ocean, polluting beaches and waterways around the world. Better products for a better planet We're committed to lightening our footprint and designing for circularity wherever possible. This product and others contain recycled material and are made using planet-friendlier manufacturing processes.

The MIK Commuter Trunk Bag offers versatile and secure on-bike storage that's easy to install and remove without the need for tools. It has multiple pockets to keep you organized, and a durable design to keep your gear secure. A sturdy handle makes off-the-bike handling a breeze. - MIK mounting system provides secure, integrated mounting with compatible racks - Made from waterproof material to help keep your gear safe - External pockets, compartments, and strapping help organize accessories and gear - Durable, lightweight construction holds up for daily use - Sturdy handle and included carrying strap for convenient off-bike use - Seven liter capacity - Light loop for easy rear light mounting

Bontrager has partnered with ABUS to offer best-in-class bike security. The Elite Combo Folding Lock features 5mm soft-touch steel construction and a unique folding design that maximizes security in a compact, easy-to-store design. It's 80cm in length, has a security rating of 7, and offers industry-leading corrosion protection. - 5mm hardened steel construction provides secure protection across an 80cm length - Soft-touch coating for a smooth look and feel that protects bike from scratching - Storage mount with latch easily mounts to bike for secure transport - Combo dial features easy-to-read numbers designed to resist wear - Industry-leading corrosion resistance - Includes folding lock and on-bike storage mount - Security rating 7

A high-performance bike degreaser that’s designed specifically for the unique needs of bicycles. A clean bike is a happy bike Our bike-specific degreaser makes it easy to keep things looking clean and running smooth. Bontrager's proprietary pH-neutral formula will keep your chain looking and feeling new without damaging the finish on your frame or components. Product details - High-performance bike degreaser is perfect for all drivetrains and bikes - Proprietary formula is Trek's factory-recommended bike degreaser - Can also be diluted in a 1:10 solution with water and used as Bike Wash - Pleasing citrus scent - Thoroughly spray drivetrain and clean with dedicated brush or chain cleaner device - 16 fl oz (473mL) spray bottle is easy to use and refillable - Also available in 1g/3.8L bulk bottle for easy and economical refills - Keep out of reach of children and do not ingest

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

Rail Race takes the iconic Rail sunglasses to new heights, specifically tailored for cycling and baseball enthusiasts. Building upon the success of the original Rail, Rail Race is a 2-lens interchange model that combines style and performance to elevate your outdoor experience.

Elevate your active lifestyle with Sanctum, the sports sunglasses that seamlessly integrate style, comfort, and performance into your everyday adventures. Sanctum enhances Tifosi's classic Swick model but with a larger lens and fit. Whether you're tackling trails, enjoying a leisurely bike ride, or pushing through intense workouts, Sanctum is the perfect companion to elevate your active endeavors.

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Our redesigned Puget 1x Lever, takes the place of our prior Puget 1x lever. With a weather-proof sealed cartridge bearing, enhanced ergonomics, and a textured paddle for enhanced grip, this budget-friendly lever looks and feels at home even on high-end builds. Designed to be used with bikes using a single front chainring, this is a "shifter style" lever. The lever comes with our standard 22.2mm clamp handlebar mount as well as two ports for adjustability.

- The original third-Eye bar-End mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to most handlebar bar-End with a rubber, Internal-Expanding plug system

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

Expand your gravel adventures with the Confluence GRX600 2x. This gravel e-bike features a lightweight MAHLE hub-drive system that puts down 40Nm of torque in a stealthy package. The aluminum frame and carbon fork balance weight, comfort, and performance. Confluence’s geometry is designed for a comfortable, stable ride, even at higher average speeds than you’re used to on bumpy backroads. Confluence also comes with our on-bike cargo features, allowing for quick and easy configuration for adventures ranging from gravel day rides to last-minute bikepacking trips. All this, paired with Shimano’s GRX600 2x drivetrain, means you’ll have the tools to pull off more rides than ever. Charge Your Adventure with Confluence GRX600 1x. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest e-bike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.

“Can I squeeze a ride in?” “Do I have the legs to see where this side road goes?” “A ride would feel great, but do I have the energy?” Confluence Flat Bar CUES 11 answers these questions with an “Oh yeah.” Its MAHLE hub-drive system delivers 40Nm of electric assist to give you the extra push you need to ride more. Confluence’s geometry is designed specifically for the extra comfort and confidence you want for riding gravel e-bikes at higher average speeds on sketchy roads. The aluminum frame and carbon fork balance weight, comfort, and performance. Cargo and fender mounts let you configure your Confluence your way. The Shimano CUES 11-speed drivetrain tops it all off with smooth shifting and a massive gear range. Charge Your Adventure with Confluence Flat Bar CUES 11. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest ebike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do. - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.

FX Sport 6 is the lightest and fastest fitness bike in the lineup. It has every performance feature of a high-end road bike, with the added benefit of a flat handlebar for additional comfort and control. A lightweight 400 Series OCLV Carbon frame, a high-quality Shimano drivetrain, and Bontrager carbon wheels make it the best choice for serious fitness riders with serious goals. - A fitness bike that's every bit as fast and capable as the race bikes found in our road lineup - The 1x drivetrain delivers a wide range of gearing with the simplicity of a single shifter - The cables are routed internally, which protects them from the elements and adds to the bike's sleek look - It's easy to accessorize with fenders, lights, and more!

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.

Loose ball bearings in bags or bottles. - Replacement loose ball bearings